





管柱脱落的故障现象是:运行电流很低,基本上是电机的空载电流,除了有一股一股的气外,井口基本上无产液,正发循环时油套连通。the failure phenomenon of the string is: the running current is very low, basically the motors no load current. besides the gas with a single strand of gas, the wellhead basically has no liquid production,&the oil sleeve is connected when circulating.减少管柱脱落的措施有:将油管上扣扭矩由原来的值提高到值;采用油管螺纹垫片;定子上的装卸短节采用防松螺纹连接;采用油管锚或张力封隔器固定螺杆泵。the measures to reduce the falling off of the pipe string are as follows: increase the torque from the original value to the maximum value; use the oil pipe screw gasket; the loading&unloading joint on the stator is connected by loosening screw thread;&use the oil pipe anchor/tension packer to fix the screw pump.


现将在现场采用同规格的g型单螺杆泵及齿轮泵在完全相同工况条件下并在输送出口压力为1 mpa时进行了简单的对比,测量了这样两组数据:当输送重油粘度约为75×102-6m2/ s时,齿轮泵出口压力表的指针跳动幅度为±0.16,三螺杆泵出口压力表的指针跳动幅度为±0.05,双螺杆泵出口压力表的指针跳动的幅度为±0.04 ;而当输送重油粘度约为150×102-6m2/ s时,齿轮泵出口压力表的指针跳动幅度为±0.22,三螺杆泵出口压力表的指针跳动的幅度为±0.06,mono,双g型单螺杆泵出口压力表的指针跳动的幅度为±0.04。这说明,g型单螺杆泵在重油的输送和喷燃过程中,介质的输送压力很稳定。并且随着介质粘度的加大,g型单螺杆泵(尤其是双螺杆泵)的无脉动特点相比之下更为明显。

湖北mono-螺耐斯由武汉螺耐斯设备有限公司提供。武汉螺耐斯设备有限公司坚持“以人为本”的企业理念,拥有一支高素质的员工队伍,力求提供---的产品和服务回馈社会,并欢迎广大新老客户光临惠顾,真诚合作、共创美好未来。螺耐斯——您可---的朋友,公司地址:湖北省武汉市蔡甸区奓山街工业园,联系人:尤经理。
联系我们时请一定说明是在100招商网上看到的此信息,谢谢!
本文链接:https://tztz289285.zhaoshang100.com/zhaoshang/283488494.html
关键词: